How To Refinish A Table Top Without Sanding

How to Refinish a Table Top Without Sanding

Refinishing a table top without sanding is a great way to save time and effort, especially if the table is in good condition and you don't want to damage the finish. Here are the steps on how to refinish a table top without sanding:

1. Clean the Table Top:

Start by thoroughly cleaning the table top with a damp cloth and mild detergent. Make sure to remove any dirt, grease, or grime. Rinse the table top with clean water and let it dry completely.

2. Apply a Deglosser:

To remove the existing finish, apply a deglosser to the table top. Deglossers are available at most hardware stores. Apply the deglosser according to the manufacturer's instructions. Typically, you will need to apply the deglosser with a clean cloth and let it sit for a few minutes before wiping it off.

3. Apply a Primer:

Once the deglosser has been removed, apply a primer to the table top. Primers help the new finish to adhere better to the table top. Apply the primer according to the manufacturer's instructions. Typically, you will need to apply two coats of primer, allowing each coat to dry completely before applying the next.

4. Apply the New Finish:

Once the primer has dried, you can apply the new finish to the table top. You can choose from a variety of finishes, such as paint, varnish, or polyurethane. Apply the finish according to the manufacturer's instructions. Typically, you will need to apply two or three coats of finish, allowing each coat to dry completely before applying the next.

5. Buff the Finish:

Once the final coat of finish has dried, you can buff it to bring out the shine. Buffing can be done by hand or with a power buffer. If you are using a power buffer, be sure to use a soft pad and start with a low speed.

6. Protect the Finish:

To protect the new finish, apply a coat of wax or polish. This will help to keep the finish looking its best and prevent it from being damaged. By following these steps, you can refinish a table top without sanding and achieve a beautiful, professional-looking finish.